How to Drive Feature Adoption in a SaaS Product

You drive feature adoption by getting the right users to find a feature, complete it once, and come back to it without being prompted. That takes four things: a clear definition of “used,” a segment of users who should have used it, help that appears at the moment of need, and an explanation fast enough that people grasp the value in seconds. A short, well-made video is often the quickest way to deliver that last part, and it is the part our studio builds for software teams.
TL;DR
- Feature adoption is discovery, first successful use, and repeat use. Awareness alone does not count.
- Measure it against active users, define “used” as a completed action, and segment the users who could have used the feature.
- Put help where the user is: contextual prompts, short tours and short videos that show the real product screen.
- Test the message before you conclude the feature is the problem, and track whether users come back.
- If the feature is hard to explain in words, a 30 to 90 second product video usually does the explaining faster than a help article.
Table of Contents
- What feature adoption actually means
- Step 1: Define adoption and measure it honestly
- Step 2: Find the users who should have adopted it
- Step 3: Teach the feature at the moment of need
- Step 4: Use short video for features that are hard to explain
- Step 5: Test the message before you blame the feature
- Step 6: Close the loop with data
- A worked example: one feature, four weeks
- Common mistakes
- Getting the video made
- FAQ
- Sources
What feature adoption actually means
Feature adoption is the path a user takes from not knowing a feature exists to using it as part of their regular work. Teams often stop at the first step. They ship the feature, post a changelog entry, send an email, and count opens.
That measures discovery, not adoption. A useful way to hold the difference: discovery is the user learning the feature exists, and adoption is the user trying it, getting a result, and returning. The strongest sign is a user coming back to the feature on their own, without a nudge from you.
There is also a hard limit nobody can message around. A feature has to solve a problem the user actually has. If it does not, no tooltip will rescue it. Everything below assumes the feature is worth adopting and that the job is to make its value obvious, quickly.
Step 1: Define adoption and measure it honestly
Before you change anything, decide what counts as adoption. This is the step teams rush, and it distorts every number that follows.
The formula
The common formula is feature adoption rate = (users who used the feature / active users in the same period) × 100. A worked example: if 2,600 of your 12,000 monthly active users used a feature, adoption is 21.7%.
Two choices change the answer a lot:
- The denominator. Use users who could have used the feature, not everyone who ever signed up. Jimo’s feature adoption guide recommends segmenting the denominator by plan tier, role or feature access before you calculate, so a feature that sits on a higher plan is not judged against free users who cannot reach it.
- The action. Count a completed action, such as a report exported or a comment posted, not a single click. A stray click inflates the rate and hides the truth.
Breadth and depth
One number is not enough. ProductQuant’s diagnostic guide splits measurement into breadth (the share of active users who ever used the feature) and depth (the share of those adopters who return in the next period). The pairing tells you what to fix:
| Breadth | Depth | What it usually means | Where to work |
|---|---|---|---|
| Low | High | People who find it love it | Discovery and messaging |
| High | Low | People try it and drop it | Value, usability, first-use experience |
| Low | Low | Wrong feature or wrong audience | Re-check the problem it solves |
| High | High | Working | Protect it, then extend it |
Benchmarks exist, but treat them as rough context. Jimo’s benchmarking guide cites a study of more than 500 SaaS products and describes 20 to 35% of active users adopting three or more core features within 30 days as average, with below 20% at risk. Your own trend over time matters more than anyone else’s median.
Step 2: Find the users who should have adopted it
Once you have a definition, find the gap: users who fit the feature but have not used it.
The documentation from Heap lays out a clean version of this routine: identify the key feature and the usage event that represents it, chart usage over time, build a segment of users who have not performed that event in the past 30 days, and export that segment for targeted emails or in-app guides.
A few practical refinements:
- Pick one feature at a time. Pick the one tied most closely to retention or expansion, not the one your team is proudest of.
- Split non-adopters into types. Some never saw the feature. Some tried it and stopped. Some saw it and decided it was not for them. Each group needs a different message, and the “tried and stopped” group is usually the most informative.
- Talk to people. Five short conversations with non-adopters will often reveal a barrier that no dashboard shows: a confusing label, a missing integration, a wrong assumption about what the feature does.
Step 3: Teach the feature at the moment of need
This is where most adoption work happens, and where most of it goes wrong. The usual failure is volume: a modal, a five-step tour, an email and a banner, all at once, all at signup.
Timing beats volume
Nielsen Norman Group’s guidance on tutorials and contextual help says to make help easy to dismiss and easy to recall, to use progressive disclosure, to avoid forcing people to memorize steps in a multistep workflow, and to understand the user’s journey so help appears when it is needed. In plain words: show less, show it later, and let people leave.
The tour data points the same way. Chameleon’s product tour benchmarks report found completion of four-step tours at 46% against 23% for five-step tours, and that users were far more likely to finish a tour they started themselves than one that appeared automatically. It is an older report from a tooling vendor, so use it as a direction, not a law: shorter, user-initiated and event-triggered help wins.
There is also a window. Jimo’s guide describes a narrow period, often the first 7 to 14 days after signup or right after a related action, when adoption is most likely, and says behavior-triggered prompts tend to outperform time-based ones. A user who has just created a project is primed to hear about templates. The same user three weeks later, mid-task on something else, is not.
Match the format to the job
Different features need different teaching. A rough guide:
| Feature type | Best first format |
|---|---|
| Small UI change or new setting | Tooltip or hotspot at the point of use |
| Multi-step workflow | Short walkthrough or checklist tied to a real task |
| New capability users did not know to ask for | Short video showing the outcome on the real screen |
| Advanced or occasional feature | Searchable help plus a durable video library |
The row that interests us is the third. When a feature is conceptual, such as an AI assistant that drafts replies or an automation builder, a tooltip cannot carry it. Users need to see the before and after. That is a video job.
Step 4: Use short video for features that are hard to explain
Text explains how. Video shows why. For a feature whose value only becomes clear once you watch it work, a short product clip does in 45 seconds what a help article does in 600 words that few people read.
How to make a feature video that earns its place:
- Open on the problem, not the feature name. “Your team re-enters the same data in three tools” lands harder than “Introducing Sync.”
- Show the real screen. Users need to recognize the interface they will actually use, with the click path visible and the cursor movement clear.
- Keep it to one feature and one outcome. If you need two outcomes, make two videos.
- End on the next action. The final frame should point to the exact button or setting.
- Add captions. Many people watch in-app or in the office with the sound off.
- Place it where the decision happens. In the empty state of the feature, in the announcement email, in the changelog, in the help center and on the relevant page of your site.
We go deeper on placement in our guide to SaaS onboarding videos and on the broader practice in SaaS product education. If your concern is that users are slow to reach value after signup, how to reduce onboarding time covers the first-session side. And if a good share of your support queue is people asking how to use something you already built, how to reduce support tickets shows how the same videos take pressure off the team.
The evidence for multimedia is suggestive rather than conclusive. A 2024 benchmark summary reported that most companies with activation rates above 50% used videos, GIFs or animations in onboarding. That is a correlation, so read it as a sign that good teams use motion, not as a promise that adding a video lifts a number.
Make it action-based, not passive
A video that people only watch has limits. The strongest pattern pairs the clip with a task: watch for 40 seconds, then try the thing on sample data. Low-risk practice, such as sample data or a sandbox, lowers the cost of a first attempt, and a first successful attempt is the real milestone. Checklist items should map to the activation event, not to setup chores. For more on turning a walkthrough into a flow people complete, see the onboarding use case from Kept, which covers guiding people to a first successful use.
Step 5: Test the message before you blame the feature
It is tempting to read low adoption as a product failure. Often it is a message failure. Before you conclude the feature is the problem, run at least two rounds of message testing: different headline, different placement, different trigger, different format.
Keep tests small and specific. Compare a text announcement against a 30 second clip for the same segment. Compare a prompt right after an adjacent action against one at login. Change one thing at a time and judge on completed actions, not clicks. A good primer on choosing what is worth testing is this A/B testing ideas guide, which argues that small cosmetic tweaks rarely move the result and that bigger changes to the message and channel do.
If adoption stays low after the message is clear, then look at the feature itself. A pattern worth knowing: high activation with weak retention at 30 and 90 days points to a usability or value problem, not an awareness one.
Step 6: Close the loop with data
Adoption work is a loop, not a launch task. Track, intervene, measure, adjust.
Heap’s Freshworks case study shows the shape of it. The Freshdesk product team spotted low use of its ticket templates feature, added an in-app tour that nudged non-adopters, and used funnels to see who created and applied templates after viewing it. Template adoption rose 20%, according to the case study, after tweaks that made the feature easier to find. The result is a vendor’s customer story, so it shows the method, not a guaranteed outcome.
A funnel gives you the places to look. Appcues frames the stages as exposed, activated, used and used again, and the drop-off between any two stages tells you what to fix:
- Drop between exposed and activated: the message or the first step is unclear.
- Drop between activated and used: the first result was not worth repeating.
- Drop between used and used again: the feature is not part of a routine yet.
For high-value accounts, add a human touch. A short call from customer success can unblock a feature faster than any self-serve content, and the notes from those calls feed your next video script.
A worked example: one feature, four weeks

Imagine a project management tool that ships an automation builder. Only 8% of active users have touched it after a month.
Week 1: measure. The team defines adoption as a published automation that runs at least once. Using active users on eligible plans as the denominator, the rate is 8%. Breadth is low, depth among those who built one is high. That points to discovery, not value.
Week 2: target. They segment users who created three or more recurring tasks but never opened the builder. These people already do the repetitive work the feature removes.
Week 3: teach. They replace a generic changelog line with a 40 second clip: a user repeats the same status update by hand, then builds a one-step automation on the real screen, and the update happens by itself. The clip sits in the builder’s empty state and in a triggered email to the segment. A one-line prompt appears right after a user creates their third recurring task.
Week 4: test and read. They send half the segment the clip and half a text announcement, then compare published automations, not views. Whichever wins becomes the default, and the same pattern goes to the next feature.
Nothing in this example is exotic. The leverage is in the definition, the segment and the format.
Common mistakes
- Announcing instead of teaching. A launch email tells people a feature exists. It does not show them a result.
- Counting views as adoption. Video plays and tour completions are signals, not outcomes.
- Teaching everything at signup. People forget what they do not need yet.
- Using one message for every segment. Non-adopters differ, and one blast serves none of them.
- Skipping the real product. Mockups and stock footage make users hunt for the actual button later.
- Treating the video as one-and-done. Interfaces change. Plan for updates to the clips that sit in-app.
What we think about feature adoption
Most of the adoption problems we see are explanation problems. The feature works, the team is proud of it, and the user still cannot say in one sentence what it does for them. That is a clarity gap, and clarity is what we build for.
Our view is that a feature video should do one job: make the outcome obvious fast. That is why we start with message strategy and a script before any animation, and why we work from your real product screens rather than invented ones. Our work combines human creative direction with AI-backed production, and every project is led by me, which keeps the story tight and the turnaround short.
If you have one feature that needs a clear introduction, a launch short covers it. If you ship regularly and every release needs its own explanation, a monthly plan keeps the videos coming as the product moves, and your adoption work stops waiting on a production queue.
flavio
Getting the video made
If the feature you are trying to land needs a video, we make them for SaaS and AI startups: scriptwriting, creative direction, animation of real product screens, voiceover, music and sound design, captions and delivery in multiple formats. Projects are ready in 10 working days, led by founder Flávio Narciso, who has delivered more than 6,200 videos since 2020.

Pricing is published, so you can plan before you reach out:
| Option | Price |
|---|---|
| Launch Short | from $1,500 one-off |
| Explainer | from $3,500 one-off |
| Launch Kit | from $7,500 one-off |
| Release plan | $3,500 per month |
| Growth plan | $6,000 per month |
| Scale plan | from $9,500 per month |
Product tours and demos, and social video ads, are also available. See the full pricing or our product tours and demos. If your feature is part of an AI product, our page on launch videos for AI startups shows how we approach it.
FAQ
What is a good feature adoption rate?
It depends on the feature. Core workflow features should reach a much larger share of active users than a niche or advanced one. Benchmarks from analytics vendors vary widely by product type and plan, so compare against your own trend and against similar features in your product rather than an industry median.
How long should I wait before judging a feature’s adoption?
Set a target window before you launch, such as a percentage of eligible users within 60 days, and check at 30 and 90 days for retention. Give your message at least two rounds of testing before deciding the feature itself is at fault.
Is a video better than an in-app tour?
They do different jobs. A tour or tooltip guides a click path at the point of use. A video explains why the feature matters and what the result looks like, which is what users need before they decide to try it. Used together, the video creates the motivation and the in-app prompt handles the first click.
How long should a feature video be?
Long enough to show one problem, one outcome and the next action, which is usually 30 to 90 seconds. If you find yourself covering several outcomes, split them into separate clips so each can sit next to the right moment in the product.
Who should own feature adoption?
Product usually owns the metric, while marketing and customer success own much of the communication. The work goes smoothest when product defines the adoption event, marketing writes the message, and everyone reads the same funnel.
Sources
- Heap Help Center: Increase Usage of Key Features
- Nielsen Norman Group: Onboarding Tutorials vs. Contextual Help
- Chameleon: Product tour benchmarks report
- Heap: Freshworks improves feature adoption by 20%
- Jimo: Feature Adoption, the Complete Guide
- Jimo: Product adoption benchmarking guide
- ProductQuant: SaaS Feature Adoption
- Appcues: Feature Adoption Guide
- Kept: Onboarding use case
- A/B Testing Ideas by Channel
